We are offering Auto Stub Puller 1/2"- 2" O.D.
Features:
Designed for fast removal of ferrous and non-ferrous tubes from Condensers, Heat Exchangers, and Boilers.
A rapid stroke allows the removal of 10 tubes a minute with little operator efforts
Gripping and pulling done in single operation.
Compact and lightweight pulling gun, easy to operate inside boiler drum with 24 Volt DC control.
Auto ejection of tube after removal.
Remove tubes without any damage to tube sheet.
Pneumatic version available for harzardous and explosive areas.
Low setup time and ease of operation.
Auto Switchover from low-pressure high flow to high-pressure low flow on load and back again when load is released.
Interchangeable pulling gun with same power pack.
Significant savings of time & money over conventional methods of stub removal.
Can pull from 13 mm to 51 mm I.D. Tubes.
Model |
Tube Size ID |
Stub Pulling Gun Model |
Hydraulic Powerpack Model |
Spring Balancer Model To Suspend Gun |
|
mm |
inch |
||||
ASP - 1 |
13 - 31 |
1/2 - 1.1/4 |
CTP-900 |
PPP-35 / EPP-15 |
SEW - 22 |
ASP - 2 |
31 - 51 |
1.1/4 - 2 |
CTP-1100 |
PPP-35 / EPP -15 |
SEW - 30 |
Stub Pulling Gun - Specifications
Model Number |
CTP - 900 |
CTP - 1100 |
| Capacity / inside dia. of expanded tube (mm) | 13 to 31 |
31 to 51 |
| Maximum stroke (mm) | 60 |
100 |
| Weight (Kg) | 23 |
27 |
| Max. Working Pressure (bar) | 700 |
700 |
| Max. Pulling force (ton) | 13 |
31 |
Hydraulic Powerpack
Note : 5 mtr. long Remote Control and 5 mtr. long Hose set are supplied with Powerpack.
Model Number |
PPP - 35 |
EPP - 15 |
| Power | Pneumatic |
Electric |
| Motot H.P. | 3.5 |
1.5 |
| Flow rate | 4.5 lpm at 0 - 70 bar 1.8 lpm at 70 - 700 bar |
3.5 lpm at 0 - 70 bar 0.45 lpm at 70 - 700 bar |
| Tank capacity (liters) | 10 |
10 |
| Weight including oil (kg) | 40 |
52 |
Note : 5 mtr. long Remote Control and 5 mtr. long Hose set are supplied with Powerpack.
Download PDF